Walkthroughs only cover what the assessor can see, and an hour goes quickly when half the windows sit behind furniture. A little preparation before your Home Security Audit Toronto visit means the time goes into real weak points, not moving boxes and hunting for keys. Most of it takes an evening, and it pays off in a sharper, more useful plan.
Gather What the Assessor Can’t See
Some of the most important details about your home aren’t visible on a walkthrough. Write these down before the visit:
-
Any break-in attempt or suspicious damage, even from before you moved in
-
Doors, windows, or locks that were replaced, and roughly when
-
Renovations that moved openings or added new ones
-
The security you already have, from alarm sensors and cameras to smart locks, and where each piece sits
-
Everyone with a key or door code, including cleaners, dog walkers, and past contractors
That history tells an assessor where problems may be hiding. A frame repaired after a forced entry or a newer window with a basic latch both look fine until someone knows to check.
Dig out any old security report or inspection notes too, if you kept a copy.
Ask Everyone in the House
The people who live with you notice things you don’t. Before the visit, ask each person a few quick questions:
-
Which door sticks or needs a shove to lock?
-
What windows get left open for air, and when?
-
Who usually locks up last, and which doors get skipped?
-
Which part of the house feels least safe at night?
-
Has anything ever made you feel uneasy at home, like a noise at the back door or someone checking a gate?
Children and older relatives often know the daytime routine best. A teenager home after school or a parent who naps in the afternoon can point to gaps you’d never spot.
Make Every Opening Easy to Reach
A walkthrough moves faster when nothing blocks the windows and doors. The night before, take care of the basics:
-
Pull furniture and boxes back from windows, and raise blinds so every latch is visible.
-
Clear the basement, especially around windows and any walk-out door.
-
Clean out window wells and side paths so the outside can be checked easily.
-
Open up the garage and keep the door between the garage and the house easy to reach.
-
Find keys for every lock, including the side gate, shed, and any window locks.
-
Settle pets in a quiet room away from the doors being checked.
If a room is off limits, like a sleeping baby’s nursery, say so at the start and offer to check that window together later. Turn on outdoor lights too, so the assessor can see how well the fixtures cover the yard if the visit runs late.
Don’t Hide the Problems Before the Visit
It’s tempting to tidy up a damaged frame or tighten every loose screw before someone arrives. Hold off. Filler, fresh paint, and new screws can hide exactly the evidence an assessor needs to judge how a door or window will hold.
Instead, mark the spots that worry you. A sticky note on a sidelight, a cracked sill, or a window that won’t latch keeps it from being missed. Together, the notes give the assessor a quick map of your concerns.
Safety comes first, of course. If a door won’t lock at all or a pane is already cracked, secure it right away and tell the assessor what you did.
Plan the Visit Itself
Most walkthroughs take 30 to 60 minutes, depending on the size of your home, so block out an hour and plan to walk along. Have your notes, photos, and keys in one place so you’re not searching mid-visit.
Book a daylight slot if you can, since it’s easier to see frames, latches and sightlines. If darkness is your main worry, walk outside yourself one evening beforehand and bring notes on any dark corners.
If possible, have the person who usually locks up at night there too.
Fort Knox Solutions offers the walkthrough free with no obligation, and it covers your doors, windows, glass doors, and basement or low-visibility areas.
Questions to Bring to the Walkthrough
A short list of questions keeps the conversation focused on your priorities:
-
Which three openings would you fix first, and why?
-
What can wait, and what shouldn’t?
-
How would the plan change on a tighter budget?
-
Will the written plan show pricing for each item?
-
Does your existing alarm or camera setup fit into the plan?
Write the answers down as you go, since it’s easy to forget the reasoning behind each priority once the visit ends.
FAQs
-
Should you clean the house before the walkthrough?
Only enough to reach every window and door. The assessor is there for frames, latches, and glass, not housekeeping.
-
Do you need paperwork for your windows and doors?
It helps if you have it. Warranty cards, receipts, or the builder’s specs can show what’s installed and whether a warranty still applies.
-
Should you share photos of past damage?
Yes. Photos of a forced door or broken pane, even if it was repaired, help the assessor understand what’s already been tested.
-
How should a tenant prepare?
Tell your landlord about the visit and gather any rules on what can be changed. That keeps the plan focused on upgrades you’re allowed to make.
-
Should you mention valuables in the house?
Yes, in general terms. Knowing that a home office holds equipment or a room stores valuables helps the assessor rank which openings matter most.
-
Should you test your alarm before the visit?
Yes. Knowing which sensors work, and what each one covers, helps the assessor spot gaps between the alarm and the physical protection.
-
How long before the visit should you start preparing?
A few days is plenty. Start the notes early, then do the clearing and key hunt the night before.
-
What happens after the walkthrough?
You get a written plan listing the weak points found and the recommended fixes in priority order, with pricing for each option.